Ceramic Heating Chamber for Fuel Systems

Electronic semiconductor / NdFeB rare earth materials, PV modules connected equipment - welcome to obtain information

    Environmental testing equipment, semiconductor equipment, vibration test equipment , impact test equipment , drop test machine to simulate the testing machine, salt spray test machine, walk-in constant temperature and humidity chamber , tensile testing machine is mainly used in environments without blast : dry, training, warm , testing, sterilization , aging, cauterizing , testing , hardening , and scientific research .

The main features and configurations: natural convection electronic control cavity preheating ambient temperature above 5 celsius degree to 300 celsius degree 

1.Model : RHD-45

2.Internal dimensions : 400*450*400 (W * D * H) mm

3.Operating temperature range : room temperature ~ 80 celsius degree .

4.heating rate : 1 celsius degree / min

Benchtop Muffle Furnace/Machine precision :

1.control accuracy : about 1.0 celsius degree 

2.Temperature uniformity : less than about 5 celsius degree ( constant temperature for three hours under load measured )

              less than about 7 celsius degree ( at constant temperature for one hour under load measured )

3.Temperature fluctuation : less than about 2 celsius degree 

4.product placement method in line with the corresponding national standards

Vacuum Coating Chamber/Mechanical sheet metal structure:

1.inner box material: color steel , 0.5mm thick

2.Carton material: color steel , 0.5mm thick

3.insulation material: high density fiberglass , thickness 75mm.

Vacuum Degassing System/Air duct parts:

1.cyclic long axis of the fan motor and high temperature resistance multi-wing structure of circulating fans to vertical diffusion of forced convection loop .

2. Duct at the top , both sides of the wind , the middle back to the wind .

3.with lighting equipment .

4.test mining double doors and the body resistant to high temperature high tensile silicone to make sure the room 's closed .

5.single door size 90 cm*180 cm (W*H), double doors open.

6.observation window with double glass

7.with a test hole (50mm) external test power line or signal line .

8.There laboratory floor , bearing 100KG/M2