Accelerated Stress Test Chamber for Fuel Systems

Pressure Testing Chamber/Uses:

Pressure accelerated life testing machine used in the design phase of products for rapidly exposed flaws and weaknesses products for electronics, electrical appliances , vehicles, metals, chemicals , building materials, communications components, defense industry , aerospace industry, electronic chip IC, testing with IT and other physical changes .

PCT Chamber/Performance:

1.A set temperature : +100 celsius degree ~ +132 celsius degree ( saturated steam temperature )

2. Humidity : 100 percent steam humidity

3 .Working pressure : 1.5Kg ~ 3.2Kg/cm2 ( design pressure within the barrel 4Kg/cm2) ( absolute pressure )

4. Time range : 000Hr ~ 999Hr

5. pressurization time : 0.00Kg ~ 1.04Kg/cm2 approximately 45 minutes

6 .uniformity of temperature fluctuation : about 0.5 celsius degree 

7 .Temperature display accuracy : 0.1 celsius degree 

8. pressure fluctuations uniformity : about 0.2Kg

Pressure Aging Testing Chamber/Chamber Material:

1. Chamber size :300mmxL500mm, round chamber

2 .full- size machine outside : the actual main (W * D * H) Vertical

3. within the barrel material: stainless steel material (SUS # 3163mm)

4. outer barrel material: stainless steel material (SUS # 3161mm))

5. Insulation Material: wool and rigid polyurethane foam insulation

6. the steam room heating pipe : seamless steel tube fin heat heater ( platinum- plated , corrosion )

Aging Testing Chamber/Control System:

a. using Taiwan and Taiwan meter microcomputer control saturated steam temperature ( using the PT-100 platinum temperature sensing element ) .

b. time controller with LED display.

c. using the pointer display gauges.

d. Microprocessor PID control of saturated steam temperature .

e. manually into the valve ( automatic replenishment functions , without stopping the continuous test ) .