Digital UV Chamber for Auto Accessories

Uv Measurement Instrument/Technical indicators:

1.Studio Dimensions:400*1250*700 ( D*W*H ) mm

2.Dimensions:450*1350*1700 ( width*depth*height ) mm

3.Temperature range:R.T +10 celsius degree ~ 70 celsius degree 

4.Humidity range:65 ~ 95 percent R.H

5.test center distance and lamp:240mm

6.Wavelength:295 ~ 330nm

7.irradiance:1000uw/cm2

8.illumination, programmable control condensation cycle

Uv Aging Tester/The advantage of using UV lamp :

1.quickly get test results

2.irradiation simple control

3.Low Maintenance

4.equipment cost and low operating costs

5.test sample irradiation uniformity .

Non-Standard UV Testing Chamber/Condensing mode advantages:

1.the same with the natural moisture

2.for accelerated testing at elevated temperatures

3.using conventional deionized water without treatment

4.condensate is purified water, not contaminated samples

5.less maintenance , no pumps and sprinklers .

Uv Weathering Test Chamber/Structure and Material:

1.Liner Material:SUS304 stainless steel plate

2.Dimension:SUS304 stainless steel hairline sheet

3.Lamp:L = 1200,40 W, 8 sticks.   [climatechambers.com]

4.Water and Consumption: 8 liters of clean water or distilled water / day

5.Temperature Controller:Made in Japan "Fuji" digital temperature controller

6.Time control instrument: timing controller

This equipment complies with GB/T16422.3-1997, GJB, ISO, ASTMG154 other standards, is modeled by sunlight , rain , dew damage caused by exposure to the material to be tested under controlled temperature alternating light and moisture cycle , the material to be tested. It uses ultraviolet radiation lamps simulate sunlight , with condensate and water spray to simulate dew and rain.