Loop Temperature Equipment

Circulation Temperature Equipment/Structural features:

1.the inner wall : Imported SUS304 stainless steel

2.Shell: cold-rolled plate electrostatic spraying

3.insulation materials : rigid polyurethane foam or fine glass wool , with good insulation characteristics

4.Seal: silicone seal imports

5.temperature and humidity control mode : BTHC balanced thermostat humidity

6.temperature and humidity control device: South Korea imported intelligent digital PID tuning regulator, 0.2 Accuracy

7.heating: stainless steel finned air heating

The main technical indicators:

1.temperature range : -70 ℃ ~ +100 (150) ℃

2.humidity range : 30% ~ 98% RH, 20% RH up according to the needs of the equipment

3.the temperature fluctuation : about 0.5 degree.        [sales(at)aslitesting.com]

4.the temperature deviation:less than 2 degree

5.humidity bias:+2 / -3% RH

6.heating and cooling rate:0.6 ~ 1.2 degree / min

Temperature Cyclical Chamber/Safety devices :

1.power overload, passing control back to the overload, short circuit protection

2.ground fault protection, motor overload protection

3.over-temperature protection

4.compression overvoltage, overload

5.for the protection of equipment , all alarms are automatically cut off the power , and send voice prompts.

Repeat Temperature Test Chamber/Services:

1.Provide equipment electrical schematics, consumable parts list , operation and maintenance manuals and other technical information and provide technical information supporting the main outsourcing parts .

2.Training equipment operators , maintenance personnel, equipment operating skills to master it completely and general repair and maintenance skills.

3.From the date of acceptance of equipment from one year to provide free service to the buyer

4.(related software and technology upgrades free of long-term support) for repair after the expiration of the paid services provided .